Services

RF & TELEMETRY INTEGRATION

UxS Advanced Telemetry / RF Integration

GCS Advanced Telemetry / RF Integration

Advanced RF Long-Range / Performance Tuning

3D MODELING, SIMULATION & PROTOTYPING

Mechanical Design & Analysis

(i.e. SolidWorks optimized SWAP-C design)

(i.e. SolidWorks mechanical integration)

Advanced 3D Modeling & Simulation

Rapid 3D Prototyping (SLS)

CUSTOM HW & ANTENNA DESIGN

Custom Hardware (HW) Design

Custom Antenna (PCB) Design

PROFESSIONAL SERVICES RATES

Hourly Virtual / Remote Consulting

On-Site Technical Consulting & Support

Custom Hardware (HW) Projects

SWARMING & AUTONOMY

UxS Multi-Node Swarming Architecture & Support

FEDERAL R&D STRATEGY & GRANTS / COMPLIANCE

Federal Research & Development (R&D)

Federal Compliance (DIU/NDAA Sect. 848)

Innovation Proudly Made in America

Services

RF & TELEMETRY INTEGRATION

​UxS Advanced Telemetry / RF Integration

Integrating the RF Module with Flight Controller (i.e. Cube Orange/Blue, VOXL 2, Skynode)

Integrating the RF Module with Companion Computer (i.e. Nvidia Jetson/Orin, Raspberry Pi 4/5)

Integrating the RF Module with Camera Module (i.e. traffic prioritization optimization)

Video Data Livestream (VDL) Optimization (i.e. h264/h265 codec setup with Gstreamer)

​​

​GCS Advanced Telemetry / RF Integration

Integrating the RF Module with Ground Control Station (i.e. custom GCS or off the shelf GCS)

GCS Optimized High-Gain Antenna Setup (i.e. 10 dB high gain directional antennas)

GCS Software Optimization & Debugging (i.e. QGroundControl or custom SW)

Custom GCS to UxS Pairing or Binding (i.e. custom scripting support for Software Defined Radios)

​

Advanced RF Long-Range / Performance Tuning

SDR Software Optimization and Profiling (i.e. minimized MCS rate and Channel Bandwidth)

Bi-Directional Amplifier (BDA) Integration (i.e. NuWaves / Triad BDA Integration)

Gimbal Tracking Antenna Setup (i.e. Optimum Solutions / UKRSPEC Systems AT-1/AT-2)

3D MODELING, SIMULATION & PROTOTYPING

​Mechanical Design & Analysis

Design Optimization for Weight, Strength, and Manufacturability

(i.e. SolidWorks optimized SWAP-C design)

CAD-based Integration of RF, Antenna, and Avionics

(i.e. SolidWorks mechanical integration)

Analysis of UxS Platforms Using FEA Tools (i.e. SolidWorks structural and mechanical analysis)

​​​

​Advanced 3D Modeling & Simulation

High-fidelity 3D CAD Modeling of UxS Platforms, GCS and Subsystems (i.e. custom SolidWorks 3D design & modeling)

Simulation of aerodynamic, thermal, and mechanical performance (i.e. SolidWorks Computation Fluid Dynamics CFD)

​

Rapid 3D Prototyping (SLS)

High-resolution SLS & HPMJF Printing for Prototypes (i.e. Nylon PA12 parts with complex geometry)

Accelerated CAD-to-Print Turnaround (i.e. as low as 1-week cycle with trusted 3rd parties)

Functional Prototypes for Field Testing (i.e. Lightweight, thermally resistant UAV parts)

CUSTOM HW & ANTENNA DESIGN

Custom Hardware (HW) Design​

Integrated RF and Mechanical Co-Design (i.e. Layouts for housing, shielding, and efficiency)

Custom RF Module PCB Mounting (i.e. RF module mounting onto FC/CC carrier board)

Custom RF Module PCB Adapters / Wire Harnesses (i.e. RF module harnesses to standard JST-4 pin to FC/CC)

​​

Custom Antenna (PCB) Design​

Compact PCB Antennas for UxS Platforms (i.e. Fin-style antennas optimized for SWaP-C)

High-Gain Yagi-Uda PCB Antennas (i.e. custom high gain directional PCB antennas)

Field-Ready, Multi-Band Configurations (i.e. Dual-band or tri-band PCB antennas for telemetry)

PROFESSIONAL SERVICES RATES

Hourly Virtual / Remote Consulting

$300/hr (i.e. System design, RF integration, federal R&D strategy)

​

On-Site Technical Consulting & Support

$500/hr + Travel (i.e. Field deployment, HW integration, customer demos)

​

Custom Hardware (HW) Projects

Variable (Quote-Based) (i.e. Antenna design, custom PCB prototyping, enclosures)

SWARMING & AUTONOMY

UxS Multi-Node Swarming Architecture & Support

Modular Swarming Architectures for UxS Fleets (i.e. Scalable mesh control for air, ground, or sea nodes)

Collaborative Autonomy & Distributed Comms (i.e. Real-time coordination via resilient RF links)

Swarm Protocol Integration & Field Testing Support (i.e. Custom swarm stacks with validated comms topologies)

FEDERAL R&D STRATEGY & GRANTS / COMPLIANCE

Federal Research & Development (R&D)

R&D Federal Grants: Proposal Development & Support (i.e. SBIR/STTR writing, budget justification, quad charts)

Federal R&D Sub‑Contracting / Sub‑Awards (i.e. Technical volume contributions, cost volume support, compliance reviews)

​

Federal Compliance (DIU/NDAA Sect. 848)

DIU Blue UAS Consulting and Programmatic Support (i.e. Package reviews, artifact submission, Blue UAS onboarding strategy)

NDAA Sect. 848 Non-China Origin Supply Chain Support (i.e. Vendor sourcing, hardware compliance mapping, 889/CMMC advisement)

Innovated and Made in America

UxS Advanced Telemetry / RF Integration

Integrating the RF Module with Flight Controller
(i.e. Cube Orange/Blue, VOXL 2, Skynode)

Integrating the RF Module with Companion Computer
(i.e. Nvidia Jetson/Orin, Raspberry Pi 4/5)

Integrating the RF Module with Camera Module
(i.e. traffic prioritization optimization)

Video Data Livestream (VDL) Optimization
(i.e. h264/h265 codec setup with Gstreamer)

GCS Advanced Telemetry / RF Integration

Integrating the RF Module with Ground Control Station
(i.e. custom GCS or off the shelf GCS)

GCS Optimized High-Gain Antenna Setup
(i.e. 10 dB high gain directional antennas)

GCS Software Optimization & Debugging
(i.e. QGroundControl or custom SW)

Custom GCS to UxS Pairing or Binding
(i.e. custom scripting support for Software Defined Radios)

SDR Software Optimization and Profiling
(i.e. minimized MCS rate and Channel Bandwidth)

Bi-Directional Amplifier (BDA) Integration
(i.e. NuWaves / Triad BDA Integration)

Gimbal Tracking Antenna Setup
(i.e. Optimum Solutions / UKRSPEC Systems AT-1/AT-2)

Mechanical Design & Analysis

Analysis of UxS Platforms Using FEA Tools
(i.e. SolidWorks structural and mechanical analysis)

Advanced 3D Modeling & Simulation

High-fidelity 3D CAD Modeling of UxS Platforms, GCS and Subsystems
(i.e. custom SolidWorks 3D design & modeling)

Simulation of aerodynamic, thermal, and mechanical performance
(i.e. SolidWorks Computation Fluid Dynamics CFD)

High-resolution SLS & HPMJF Printing for Prototypes
(i.e. Nylon PA12 parts with complex geometry)

Accelerated CAD-to-Print Turnaround
(i.e. as low as 1-week cycle with trusted 3rd parties)

Functional Prototypes for Field Testing
(i.e. Lightweight, thermally resistant UAV parts)

Custom Hardware (HW) Design

Integrated RF and Mechanical Co-Design
(i.e. Layouts for housing, shielding, and efficiency)

Custom RF Module PCB Mounting
(i.e. RF module mounting onto FC/CC carrier board)

Custom RF Module PCB Adapters / Wire Harnesses
(i.e. RF module harnesses to standard JST-4 pin to FC/CC)

Custom Antenna (PCB) Design

Compact PCB Antennas for UxS Platforms
(i.e. Fin-style antennas optimized for SWaP-C)

High-Gain Yagi-Uda PCB Antennas
(i.e. custom high gain directional PCB antennas)

Field-Ready, Multi-Band Configurations
(i.e. Dual-band or tri-band PCB antennas for telemetry)

$300/hr
(i.e. System design, RF integration, federal R&D strategy)

$500/hr + Travel
(i.e. Field deployment, HW integration, customer demos)

Variable (Quote-Based)
(i.e. Antenna design, custom PCB prototyping, enclosures)

Modular Swarming Architectures for UxS Fleets
(i.e. Scalable mesh control for air, ground, or sea nodes)

Collaborative Autonomy & Distributed Comms
(i.e. Real-time coordination via resilient RF links)

Swarm Protocol Integration & Field Testing Support
(i.e. Custom swarm stacks with validated comms topologies)

R&D Federal Grants: Proposal Development & Support
(i.e. SBIR/STTR writing, budget justification, quad charts)

Federal R&D Sub‑Contracting / Sub‑Awards
(i.e. Technical volume contributions, cost volume support, compliance reviews)

DIU Blue UAS Consulting and Programmatic Support
(i.e. Package reviews, artifact submission, Blue UAS onboarding strategy)

NDAA Sect. 848 Non-China Origin Supply Chain Support
(i.e. Vendor sourcing, hardware compliance mapping, 889/CMMC advisement)